[Free] 2018(Jan) EnsurePass Braindumps ECCouncil 312-38 Dumps with VCE and PDF 21-30
EC-Council Network Security Administrator (ENSA)
Question No: 21 – (Topic 1)
Which of the following is a distributed multi-access network that helps in supporting integrated communications using a dual bus and distributed queuing?
Logical Link Control
Token Ring network
Answer: C Explanation:
In telecommunication, a distributed-queue dual-bus network (DQDB) is a distributed multi- access network that helps in supporting integrated communications using a dual bus and distributed queuing, providing access to local or metropolitan area networks, and supporting connectionless data transfer, connection-oriented data transfer, and isochronous communications, such as voice communications. IEEE 802.6 is an example of a network providing DQDB access methods. Answer option B is incorrect. A Token Ring network is a local area network (LAN) in which all computers are connected in a ring or star topology and a bit- or token-passing scheme is used in order to prevent the collision of data between two computers that want to send messages at the same time. The Token Ring protocol is the second most widely-used protocol on local area networks after Ethernet.
The IBM Token Ring protocol led to a standard version, specified as IEEE 802.5. Both protocols are used and are very similar. The IEEE 802.5 Token Ring technology provides for data transfer rates of either 4 or 16 megabits per second.
Answer option A is incorrect. The IEEE 802.2 standard defines Logical Link Control (LLC). LLC is the upper portion of the data link layer for local area networks.
Answer option D is incorrect. Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) is an access method used by wireless networks (IEEE 802.11). In this method, a device or computer that transmits data needs to first listen to the channel for an amount of time to check for any activity on the channel. If the channel is sensed as idle, the device is allowed to transmit data. If the channel is busy, the device postpones its transmission.
Once the channel is clear, the device sends a signal telling all other devices not to transmit data, and then sends its packets. In Ethernet (IEEE 802.3) networks that use CSMA/CD, the device or computer continues to wait for a time and checks if the channel is still free. If the channel is free, the device transmits packets and waits for an acknowledgment signal indicating that the packets were received.
Question No: 22 – (Topic 1)
Which of the following is a distributed application architecture that partitions tasks or work loads between service providers and service requesters?Each correct answer represents a complete solution. Choose all that apply.
Peer-to-peer (P2P) computing
Answer: A,C Explanation:
Client-server networking is also known as client-server computing. It is a distributed application architecture that partitions tasks or work loads between service providers (servers) and service requesters, called clients. Often clients and servers operate over a computer network on separate hardware. A server machine is a high-performance host that is running one or more server programs which share its resources with clients. A client does not share any of its resources, but requests a server#39;s content or service function.
Clients therefore initiate
communication sessions with servers which await (listen to) incoming requests.
Answer options D and B are incorrect. Peer-to-peer (P2P) computing or networking is a distributed application architecture that partitions tasks or workloads between peers. Peers
are equally privileged, equipotent participants in the application. They are said to form a peer-to-peer network of nodes. Peer-to-peer networking (also known simply as peer networking) differs from client-server networking, where certain devices have the responsibility to provide or quot;servequot; data, and other devices consume or otherwise act as quot;clientsquot; of those servers.
Question No: 23 – (Topic 1)
Which of the following is an attack on a website that changes the visual appearance of the site and seriously damages the trust and reputation of the website?
Answer: A Explanation:
Website defacement is an attack on a website that changes the visual appearance of the site. These are typically the work of system crackers, who break into a Web server and replace the hosted website with one of their own.Sometimes, the Defacer makes fun of the system administrator for failing to maintain server security. Most times, the defacement is harmless; however, it can sometimes be used as a distraction to cover up more sinister actions such as uploading malware.
A high-profile website defacement was carried out on the website of the company SCO Group following its assertion that Linux contained stolen code. The title of the page was changed from Red Hat vs. SCO to SCO vs. World with various satirical content.
Answer option D is incorrect. Buffer overflow is a condition in which an application receives more data than it is configured to accept. This usually occurs due to programming errors in the application. Buffer overflow can terminate or crash the application.
Answer option B is incorrect. A zero-day attack, also known as zero-hour attack, is a computer threat that tries to exploit computer application vulnerabilities which are unknown to others, undisclosed to the software vendor, or for which no security fix is available. Zero- day exploits (actual code that can use a security hole to carry out an attack) are used or shared by attackers before the software vendor knows about the vulnerability. User awareness training is the most effective technique to mitigate such attacks.
Answer option C is incorrect. Spoofing is a technique that makes a transmission appear to have come from an authentic source by forging the IP address, email address, caller ID, etc. In IP spoofing, a hacker modifies packet headers by using someone else#39;s IP address to hide his identity. However, spoofing cannot be used while surfing the Internet, chatting on-line, etc. because forging the source IP address causes the responses to be misdirected.
Question No: 24 – (Topic 1)
Which of the following cables is made of glass or plastic and transmits signals in the form of light?
Twisted pair cable
Fiber optic cable
Answer: D Explanation:
Fiber optic cable is also known as optical fiber. It is made of glass or plastic and transmits signals in the form of light. It is of cylindrical shape and consists of three concentric sections: the core, the cladding, and the jacket. Optical fiber carries much more information than conventional copper wire and is in general not subject to electromagnetic interference and the need to retransmit signals. Most telephone company#39;s long-distance lines are now made of optical fiber. Transmission over an optical fiber cable requires repeaters at distance intervals. The glass fiber requires more protection within an outer cable than copper.
Answer option B is incorrect. Twisted pair cabling is a type of wiring in which two conductors (the forward and return conductors of a single circuit) are twisted together for the purposes of canceling out electromagnetic interference (EMI) from external sources. It consists of the following twisted pair cables:
Shielded Twisted Pair: Shielded Twisted Pair (STP) is a special kind of copper telephone wiring used in some business installations. An outer covering or shield is added to the ordinary twisted pair telephone wires; the shield functions as a ground. Twisted pair is the ordinary copper wire that connects home and many business computers to the telephone company. Shielded twisted pair is often used in business installations. Unshielded Twisted
Pair: Unshielded Twisted Pair (UTP) is the ordinary wire used in home. UTP cable is also the most common cable used in computer networking. Ethernet, the most common data networking standard, utilizes UTP cables. Twisted pair cabling is often used in data networks for short and medium length connections because of its relatively lower costs compared to optical fiber and coaxial cable.UTP is also finding increasing use in video applications, primarily in security cameras. Many middle to high-end cameras include a UTP output with setscrew terminals. This is made possible by the fact that UTP cable bandwidth has improved to match the baseband of television signals.
Answer option A is incorrect. Coaxial cable is the kind of copper cable used by cable TV companies between the community antenna and user homes and businesses. Coaxial cable is sometimes used by telephone companies from their central office to the telephone poles near users. It is also widely installed for use in business and corporation Ethernet and other types of local area network. Coaxial cable is called quot;coaxialquot; because it includes one physical channel that carries the signal surrounded (after a layer of insulation) by another concentric physical channel, both running along the same axis. The outer channel serves as a ground. Many of these cables or pairs of coaxial tubes can be placed in a single outer sheathing and, with repeaters, can carry information for a great distance. It is shown in the figure below:
Answer option C is incorrect. Plenum cable is cable that is laid in the plenum spaces of buildings. The plenum is the space that can facilitate air circulation for heating and air conditioning systems, by providing pathways for either heated/conditioned or return airflows. Space between the structural ceiling and the dropped ceiling or under a raised floor is typically considered plenum. However, some drop ceiling designs create a tight seal that does not allow for airflow and therefore may not be considered a plenum air-handling space. The plenum space is typically used to house the communication cables for the building#39;s computer and telephone network.
Question No: 25 – (Topic 1)
Which of the following is a network that supports mobile communications across an arbitrary number of wireless LANs and satellite coverage areas?
Answer: C Explanation:
A global area network (GAN) is a network that is used for supporting mobile communications across an arbitrary number of wireless LANs, satellite coverage areas, etc. The key challenge in mobile communications is handing off the user communications from one local coverage area to the next.
Answer option B is incorrect. A wide area network (WAN) is a geographically dispersed telecommunications network. The term distinguishes a broader telecommunication structure from a local area network (LAN). A wide area network may be privately owned or rented, but the term usually connotes the inclusion of public (shared user) networks. An intermediate form of network in terms of geography is a metropolitan area network (MAN). A wide area network is also defined as a network of networks, as it interconnects LANs over a wide geographical area.
Answer option D is incorrect. A home area network (HAN) is a residential LAN that is used for communication between digital devices typically deployed in the home, usually a small number of personal computers and accessories, such as printers and mobile computing devices.
Answer option A is incorrect. The Local Area Network (LAN) is a group of computers connected within a restricted geographic area, such as residence, educational institute, research lab, and various other organizations. It allows the users to share files and services, and is commonly used for intra-office communication. The LAN has connections with other LANs via leased lines, leased services, or by tunneling across the Internet using the virtual private network technologies.
Question No: 26 CORRECT TEXT – (Topic 1)
Fill in the blank with the appropriate term. A network is a local area network (LAN) in which all computers are connected in a ring or star topology and a
bit- or token-passing scheme is used for preventing the collision of data between two computers that want to send messages at the same time.
Answer: Token Ring
Question No: 27 – (Topic 1)
Which of the following techniques is used for drawing symbols in public places for advertising an open Wi-Fi wireless network?
Answer: D Explanation:
Warchalking is the drawing of symbols in public places to advertise an open Wi-Fi wireless network. Having found a Wi-Fi node, the warchalker draws a special symbol on a nearby object, such as a wall, the pavement, or a lamp post. The name warchalking is derived from the cracker terms war dialing and war driving.
Answer option B is incorrect. War driving, also called access point mapping, is the act of locating and possibly exploiting connections to wireless local area networks while driving around a city or elsewhere. To do war driving, one needs a vehicle, a computer (which can be a laptop), a wireless Ethernet card set to work in promiscuous mode, and some kind of an antenna which can be mounted on top of or positioned inside the car. Because a wireless LAN may have a range that extends beyond an office building, an outside user may be able to intrude into the network, obtain a free Internet connection, and possibly gain access to company records and other resources.
Answer option C is incorrect. War dialing is a technique of using a modem to automatically scan a list of telephone numbers, usually dialing every number in a local area code to search for computers, BBS systems, and fax machines. Hackers use the resulting lists for various purposes, hobbyists for exploration, and crackers (hackers that specialize in computer security) for password guessing.
Answer option A is incorrect. Spamming is the technique of flooding the Internet with a number of copies of the same message. The most widely recognized form of spams are e- mail spam, instant messaging spam, Usenet newsgroup spam, Web search engine spam,
spam in blogs, online classified ads spam, mobile phone messaging spam, Internet forum spam, junk fax transmissions, social networking spam, television advertising and file sharing network spam.
Question No: 28 – (Topic 1)
Which of the following is a standard protocol for interfacing external application software with an information server, commonly a Web server?
Answer: C Explanation:
The Common Gateway Interface (CGI) is a standard protocol for interfacing external application software with an information server, commonly a Web server. The task of such an information server is to respond to requests (in the case of web servers, requests from client web browsers) by returning output. When a user requests the name of an entry, the server will retrieve the source of that entry#39;s page (if one exists), transform it into HTML, and send the result.
Answer option A is incorrect. DHCP is a Dynamic Host Configuration Protocol that allocates unique (IP) addresses dynamically so that they can be used when no longer needed. A DHCP server is set up in a DHCP environment with the appropriate configuration parameters for the given network. The key parameters include the range or quot;poolquot; of available IP addresses, correct subnet masks, gateway, and name server addresses.
Answer option B is incorrect. The Internet Protocol (IP) is a protocol used for communicating data across a packet-switched inter-network using the Internet Protocol Suite, also referred to as TCP/IP.IP is the primary protocol in the Internet Layer of the Internet Protocol Suite and has the task of delivering distinguished protocol datagrams (packets) from the source host to the destination host solely based on their addresses. For this purpose, the Internet Protocol defines addressing methods and structures for datagram encapsulation. The first major version of addressing structure, now referred to as Internet Protocol Version 4 (IPv4), is still the dominant protocol of the Internet, although the
successor, Internet Protocol Version 6 (IPv6), is being deployed actively worldwide. Answer option D is incorrect. Transmission Control Protocol (TCP) is a reliable, connection- oriented protocol operating at the transport layer of the OSI model. It provides a reliable packet delivery service encapsulated within the Internet Protocol (IP). TCP guarantees the delivery of packets, ensures proper sequencing of data, and provides a checksum feature that validates both the packet header and its data for accuracy. If the network corrupts or loses a TCP packet during transmission, TCP is responsible for retransmitting the faulty packet. It can transmit large amounts of data. Application layer protocols, such as HTTP and FTP, utilize the services of TCP to transfer files between clients and servers.
Question No: 29 – (Topic 1)
Which of the following honeypots provides an attacker access to the real operating system without any restriction and collects a vast amount of information about the attacker?
Answer: A Explanation:
A high-interaction honeypot offers a vast amount of information about attackers. It provides an attacker access to the real operating system without any restriction. A high-interaction honeypot is a powerful weapon that provides opportunities to discover new tools, to identify new vulnerabilities in the operating system, and to learn how blackhats communicate with one another.
Answer option D is incorrect. A low-interaction honeypot captures limited amounts of information that are mainly transactional data and some limited interactive information. Because of simple design and basic functionality, low-interaction honeypots are easy to install, deploy, maintain, and configure. A low-interaction honeypot detects unauthorized scans or unauthorized connection attempts. A low-interaction honeypot is like a one-way connection, as the honeypot provides services that are limited to listening ports. Its role is very passive and does not alter any traffic. It generates logs or alerts when incoming packets match their patterns.
Answer option B is incorrect. A medium-interaction honeypot offers richer interaction
capabilities than a low-interaction honeypot, but does not provide any real underlying operating system target. Installing and configuring a medium-interaction honeypot takes more time than a low-interaction honeypot. It is also more complicated to deploy and maintain as compared to a low-interaction honeypot. A medium-interaction honeypot captures a greater amount of information but comes with greater risk. Answer option C is incorrect. Honeyd is an example of a low-interaction honeypot.
Question No: 30 – (Topic 1)
Which of the following representatives of the incident response team takes forensic backups of systems that are the focus of an incident?
Information security representative
Answer: A Explanation:
A technical representative creates forensic backups of systems that are the focus of an incident and provides valuable information about the configuration of the network and target system.
Answer option B is incorrect. A lead investigator acts as the manager of the computer security incident response team.
Answer option D is incorrect. The legal representative looks after legal issues and ensures that the investigation process does not break any law.
Answer option C is incorrect. The information security representative informs about the security safeguards that may affect their ability to respond to the incident.
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|