[Free] 2017(Oct) EnsurePass Testinsides Microsoft 70-410 Dumps with VCE and PDF 61-70
Installing and Configuring Windows Server 2012
Question No: 61 – (Topic 1)
Your network contains two Hyper-V hosts that run Windows Server 2012 R2. The Hyper-V hosts contain several virtual machines that run Windows Server 2012 R2.
You install the Network Load Balancing feature on the virtual machines.
You need to configure the virtual machines to support Network Load Balancing (NLB). Which virtual machine settings should you configure?
Answer: D Explanation: Explanation:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a0a9d-26a2-49ba- bbbe- 29d11fcbb7ce/nlb-on-hyperv?forum=winserverhyperv
For NLB to be configured you need to enable MAC address spoofing.
Question No: 62 – (Topic 1)
Your network contains an Active Directory forest that contains three domains.
A group named Group1 is configured as a domain local distribution group in the forest root domain.
You plan to grant Group1 read-only access to a shared folder named Share1.Share1 is located in a child domain.
You need to ensure that the members of Group1 can access Share1. What should you do first?
Convert Group1 to a universal security group.
Convert Group1 to a global distribution group.
Convert Group1 to a universal distribution group.
Convert Group1 to a domain local security group.
Answer: A Explanation:
Universal can be used for any domain or forest. Furthermore a Universal group can span multiple domains, even the entire forest.
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 5: Install and Administer Active Directory, Objective 5.3 Create and manage Active Directory groups and Organization units, p. 289-291, 293
Question No: 63 – (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 is connected to two Fibre Channel SANs and is configured as shown in the following table.
You have a virtual machine named VM1.
You need to configure VM1 to connect to SAN1. What should you do first?
Add one HBA
Create a Virtual Fibre Channel SAN.
Create a Hyper-V virtual switch.
Configure network adapter teaming.
Answer: B Explanation:
You need your virtualized workloads to connect easily and reliably to your existing storage arrays.
Windows Server 2012 provides Fibre Channel ports within the guest operating system, which allows you to connect to Fibre Channel directly from within virtual machines. This feature protects your investments in Fibre Channel, enables you to virtualize workloads that use direct access to Fibre Channel storage, allows you to cluster guest operating systems over Fibre Channel, and provides an important new storage option for servers hosted in your virtualization infrastructure.
With this Hyper-V virtual Fibre Channel feature, you can connect to Fibre Channel storage from within a virtual machine. This allows you to use your existing Fibre Channel investments to support virtualized workloads.
Support for Fibre Channel in Hyper-V guests also includes support for many related features, such as virtual SANs, live migration, and MPIO.
Question No: 64 HOTSPOT – (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You need to switch Server1 to a Server Core installation of Windows Server 2012 R2. What command should you run?
To answer, select the appropriate options in the answer area.
Question No: 65 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that hosts the primary DNS zone for contoso.com.
All client computers are configured to use DC1 as the primary DNS server.
You need to configure DC1 to resolve any DNS requests that are not for the contoso.com zone by querying the DNS server of your Internet Service Provider (ISP).
What should you configure?
Naming Authority Pointer (NAPTR) DNS resource records (RR)
Name server (NS) records
Answer: C Explanation:
On a network with several servers and/or client computers a server that is configured as a
forwarder will manage the Domain Name System (DNS) traffic between your network and the Internet.
Question No: 66 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 and a domain controller named DC2.All servers run Windows Server 2012 R2. All domain controllers are configured as DNS servers.
On Server1, you open Server Manager and you add DC2 as another server to manage.
From Server Manager on Server1, you right-click DC2 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when you right-click DC2, you see the option to run DNS Manager.
What should you do?
On Server1, install the Role Administration Tools.
In the domain, add Server1 to the DNS Admins group.
On DC2 and Server1, run winrmquickconfig.
On DC2, install the Feature Administration Tools.
Answer: A Explanation:
The Domain Name System (DNS) role is a role that provides a standard method for associating names with numeric Internet addresses. This lets users refer to network computers by using easy-to-remember names instead of a long series of numbers. Windows DNS services can be integrated with DHCP services, eliminating the need to add DNS records as computers are added to the network.
Question No: 67 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1. Which tool should you use?
File Server Resource Manager (FSRM)
Answer: B Explanation:
You can create a VHD from either the Disk Management snap-in or the command line (diskpart).
From the DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code demonstrates how to create a VHD file at C:\vdisks\disk1.vdh with a maximum file size of 16 GB (or 16,000 MB).
Microsoft DiskPart version 6.1.7100
Copyright (C) 1999-2008 Microsoft Corporation. On computer: WIN7
DISKPARTgt; create vdisk file=quot;C:\vdisks\disk1.vhdquot; maximum=16000
Question No: 68 HOTSPOT – (Topic 1)
Your network contains an Active Directory forest. The forest contains a single domain named contoso.com.
AppLocker policies are enforced on all member servers.
You view the AppLocker policy applied to the member servers as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.
Question No: 69 – (Topic 1)
Your network contains an Active Directory forest named contoso.com.
The forest contains two domains named contoso.com and child.contoso.com and two sites named Site1 and Site2. The domains and the sites are configured as shown in following table.
When the link between Site1 and Site2 fails, users fail to log on to Site2.
You need to identify what prevents the users in Site2 from logging on to the child.contoso.com domain.
What should you identify?
The placement of the global catalog server
The placement of the infrastructure master
The placement of the domain naming master
The placement of the PDC emulator
Answer: D Explanation:
The exhibit shows that Site2 does not have a PDC emulator. This is important because of the close interaction between the RID operations master role and the PDC emulator role. The PDC emulator processes password changes from earlier-version clients and other domain controllers on a best-effort basis; handles password authentication requests involving passwords that have recently changed and not yet been replicated throughout the domain; and, by default, synchronizes time. If this domain controller cannot connect to the PDC emulator, this domain controller cannot process authentication requests, it may not be able to synchronize time, and password updates cannot be replicated to it.
The PDC emulator master processes password changes from client computers and replicates these updates to all domain controllers throughout the domain. At any time, there can be only one domain controller acting as the PDC emulator master in each domain in the forest.
Question No: 70 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table.
You need to recommend a solution to minimize the amount of disk space used for the checkpoint of VM1.
What should you do before you create the checkpoint?
Run the Resize-VHD cmdlet.
Convert Disk1.vhd to a dynamically expanding disk.
Shut down VM1.
Run the Convert-VHD cmdlet.
Answer: C Explanation:
Changing between a fixed and dynamic disk type does not alter the size of a SNAPSHOT much at all.
However, since a snapshot is a record of a VMs state at the exact time that the snapshot was taken, shutting down the VM before taking the snapshot prevents the snapshot from having to contain all of the data in RAM (as there is no data in memory when a machine is powered down).
The question states that the solution should minimize the amount of disk space used for the checkpoint of VM1. If the checkpoint is taken while VM1 is running, there will be two attritional files present at the checkpoint location; a .VSV with VM1 saved state files and a
.BIN file which contains VM1’s memory contents. If, however, VM1 is shut down first, these files will not be created, thus saving disk space.
In order to convert Disk1.vhd to a dynamically expanding disk, VM1 still have to be shut down.
100% Free Download!
–Download Free Demo:70-410 Demo PDF
100% Pass Guaranteed!
–Download 2017 EnsurePass 70-410 Full Exam PDF and VCE
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|