Braindumps Microsoft MCSD Dumps

70-410,70-411,70-412,70-413,70-414,70-417,70-461,70-462,70-463,70-464,70-465,70-480,70-483,70-486,70-487

Home » [Free] 2017(Sep) EnsurePass Braindumps Microsoft 70-411 Dumps with VCE and PDF 101-110

[Free] 2017(Sep) EnsurePass Braindumps Microsoft 70-411 Dumps with VCE and PDF 101-110

EnsurePass
2017 Sep Microsoft Official New Released 70-411
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-411.html

Administering Windows Server 2012

Question No: 101 HOTSPOT – (Topic 2)

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Remote Access server role installed.

You need to configure the ports on Server1 to ensure that client computers can establish VPN connections to Server1. The solution must NOT require the use of certificates or pre- shared keys.

What should you modify?

To answer, select the appropriate object in the answer area.

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation:

Ensurepass 2017 PDF and VCE

The four types of tunneling protocols used with a VPN/RAS server running on Windows Server 2012 include:

Point-to-Point Tunneling Protocol (PPTP): A VPN protocol based on the legacy Point-to- Point protocol used with modems. The PPTP specification does not describeencryption or authentication features and relies on the Point-to-Point Protocol being tunneled to implement security functionality.

Layer 2 Tunneling Protocol (L2TP): Used with IPsec to provide security. L2TP supports either computer certificates or a preshared key as the authentication method for IPsec. IKEv2: IKE is short for Internet Key Exchange, which is a tunneling protocol that uses IPsec Tunnel Mode protocol. The message is encrypted with one of the following protocols by using encryption keys that are generated from the IKEv2 negotiation process.

Secure Socket Tunneling Protocol (SSTP): Introduced with Windows Server 2008, which uses the HTTPS protocol over TCP port 443 to pass traffic through firewalls

References:

http: //en. wikipedia. org/wiki/Point-to-Point_Tunneling_Protocol

Question No: 102 DRAG DROP – (Topic 2)

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Network Policy and Access Services server role installed.

All of the VPN servers on your network use Server1 for RADIUS authentication. You create a security group named Group1.

You need to configure Network Policy and Access Services (NPAS) to meet the following requirements:

->Ensure that only the members of Group1 can establish a VPN connection to the VPN servers.

->Allow only the members of Group1 to establish a VPN connection to the VPN

servers if the members are using client computers that run Windows 8 or later.

Which type of policy should you create for each requirement?

To answer, drag the appropriate policy types to the correct requirements. Each policy type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Question No: 103 – (Topic 2)

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.

An organizational unit (OU) named ResearchServers contains the computer accounts of all research servers.

All domain users are configured to have a minimum password length of eight characters.

You need to ensure that the minimum password length of the local user accounts on the research servers in the ResearchServers OU is 10 characters.

What should you do?

  1. Configure a local Group Policy object (GPO) on each research server.

  2. Create and link a Group Policy object (GPO) to the ResearchServers OU.

  3. Create a universal group that contains the research servers. Create a Password Settings object (PSO) and assign the PSO to the group.

  4. Create a global group that contains the research servers. Create a Password Settings object (PSO) and assign the PSO to the group.

    Answer: B Explanation:

    For a domain, and you are on a member server or a workstation that is joined to the domain

    1. Open Microsoft Management Console (MMC).

    2. On the File menu, click Add/Remove Snap-in, and then click Add.

    3. Click Group Policy Object Editor, and then click Add.

    4. In Select Group Policy Object, click Browse.

    5. In Browse for a Group Policy Object, select a Group Policy object (GPO) in the appropriate domain, site, or organizational unit-or create a new one, click OK, and then click Finish.

    6. Click Close, and then click OK.

    7. In the console tree, click Password Policy. Where?

      Group Policy Object [computer name] Policy/Computer Configuration/Windows Settings/Security Settings/Account Policies/Password Policy

    8. In the details pane, right-click the policy setting that you want, and then click Properties.

    9. If you are defining this policy setting for the first time, select the Define this policy setting check box.

    10. Select the options that you want, and then click OK.

Question No: 104 – (Topic 2)

You have a server named Server1 that runs Windows Server 2012 R2. You discover that the performance of Server1 is poor.

The results of a performance report generated on Server1 are shown in the following table.

Ensurepass 2017 PDF and VCE

You need to identify the cause of the performance issue. What should you identify?

  1. Driver malfunction

  2. Insufficient RAM

  3. Excessive paging

  4. NUMA fragmentation

Answer: A Explanation:

Processor: %DPC Time. Much like the other values, this counter shows the amount of time that the processor spends servicing DPC requests. DPC requests are more often than not associated with the network interface.

Processor: % Interrupt Time. This is the percentage of time that the processor is spending on handling Interrupts. Generally, if this value exceeds 50% of the processor time you may have a hardware issue. Some components on the computer can force this issue and not really be a problem. For example a programmable I/O card like an old disk controller card, can take up to 40% of the CPU time. A NIC on a busy IIS server can likewise generate a large percentage of processor activity.

Processor: % User Time. The value of this counter helps to determine the kind of processing that is affecting the system. Of course the resulting value is the total amount of non-idle time that was spent on User mode operations. This generally means application code.

Processor: %Privilege Time. This is the amount of time the processor was busy with Kernel mode operations. If the processor is very busy and this mode is high, it is usually an indication of some type of NT service having difficulty, although user mode programs can make calls to the Kernel mode NT components to occasionally cause this type of performance issue.

Memory: Pages/sec. This value is often confused with Page Faults/sec. The Pages/sec counter is a combination of Pages Input/sec and Pages Output/sec counters. Recall that Page Faults/sec is a combination of hard page faults and soft page faults. This counter, however, is a general indicator of how often the system is using the hard drive to store or retrieve memory associated data.

References:

http: //technet. microsoft. com/en-us/library/cc768048. aspx

Question No: 105 – (Topic 2)

Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.

On all of the domain controllers, Windows is installed in C:\Windows and the Active Directory database is located in D:\Windows\NTDS\.

All of the domain controllers have a third-party application installed.

The operating system fails to recognize that the application is compatible with domain controller cloning.

You verify with the application vendor that the application supports domain controller cloning.

You need to prepare a domain controller for cloning. What should you do?

  1. In D:\Windows\NTDS\, create an XML file named DCCloneConfig.xml and add the application information to the file.

  2. In the root of a USB flash drive, add the application information to an XML file named DefaultDCCIoneAllowList.xml.

  3. In D:\Windows\NTDS\, create an XML file named CustomDCCloneAllowList.xml and add the application information to the file.

  4. In C:\Windows\System32\Sysprep\Actionfiles\, add the application information to an XML file named Respecialize.xml.

Answer: C Explanation:

Place the CustomDCCloneAllowList.xml file in the same folder as the Active Directory database (ntds. dit) on the source Domain Controller.

Ensurepass 2017 PDF and VCE

References:

http: //blogs. dirteam. com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in- active-directory-domain-services-in-windows-server-2012-part-13-domain-controller- cloning. aspx

http: //www. thomasmaurer. ch/2012/08/windows-server-2012-hyper-v-how-to-clone-a- virtual-domain-controller

http: //technet. microsoft. com/en-us/library/hh831734. aspx

Question No: 106 – (Topic 2)

You have a group Managed Service Account named Service01. Three servers named Server01, Server02, and Server03 currently use the Service01 service account.

You plan to decommission Server01.

You need to remove the cached password of the Service01 service account from Server01. The solution must ensure that Server02 and Server 03 continue to use Service01.

Which cmdlet should you run?

  1. Set-ADServiceAccount

  2. Remove-ADServiceAccount

  3. Uninstall-ADServiceAccount

  4. Reset-ADServiceAccountPassword

Answer: B

Explanation: The Remove-ADServiceAccount cmdlet removes an Active Directory service account. This cmdlet does not make changes to any computers that use the service account. After this operation, the service account is no longer hosted on the target

computer but still exists in the directory.

Incorrect:

Not C: The Uninstall-ADServiceAccount cmdlet removes an Active Directory service account on the computer on which the cmdlet is run. The specified service account must be installed on the computer.

Reference: Remove-ADServiceAccount https://technet.microsoft.com/en-us/library/ee617190.aspx

Question No: 107 – (Topic 2)

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed.

Each time a user receives an access-denied message after attempting to access a folder on Server1, an email notification is sent to a distribution list named DL1.

You create a folder named Folder1 on Server1, and then you configure custom NTFS permissions for Folder 1.

You need to ensure that when a user receives an access-denied message while attempting to access Folder1, an email notification is sent to a distribution list named DL2. The solution must not prevent DL1 from receiving notifications about other access-denied messages.

What should you do?

  1. From File Explorer, modify the Classification tab of Folder1.

  2. From the File Server Resource Manager console, modify the Email Notifications settings.

  3. From the File Server Resource Manager console, set a folder management property.

  4. From File Explorer, modify the Customize tab of Folder1.

Answer: C Explanation:

When using the email model each of the file shares, you can determine whether access requests to each file share will be received by the administrator, a distribution list that represents the file share owners, or both.

You can use the File Server Resource Manager console to configure the owner distribution list by editing the management properties of the classification properties.

Reference: http://technet.microsoft.com/en-us/library/jj574182.aspx#BKMK_12

Question No: 108 – (Topic 2)

Your company has a main office and a branch office. The main office is located in Seattle. The branch office is located in Montreal. Each office is configured as an Active Directory site.

The network contains an Active Directory domain named adatum.com. The Seattle office contains a file server named Server1. The Montreal office contains a file server named Server2.

The servers run Windows Server 2012 R2 and have the File and Storage Services server role, the DFS Namespaces role service, and the DFS Replication role service installed.

Server1 and Server2 each have a share named Share1 that is replicated by using DFS Replication.

You need to ensure that users connect to the replicated folder in their respective office when they connect to \\contoso.com\Share1.

Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)

  1. Create a replication connection.

  2. Create a namespace.

  3. Share and publish the replicated folder.

  4. Create a new topology.

  5. Modify the Referrals settings.

    Answer: B,C,E Explanation:

    To share a replicated folder and publish it to a DFS namespace Click Start, point to Administrative Tools, and then click DFS Management. In the console tree, under the Replication node, click the replication group that contains the replicated folder you want to share. In the details pane, on the Replicated Folders tab, right-click the replicated folder that you want to share, and then click Share and Publish in Namespace. In the Share and Publish Replicated Folder Wizard, click Share and publish the replicated folder in a namespace, and then follow the steps in the wizard.

    Note that: If you do not have an existing namespace, you can create one in the Namespace Path page in the Share and Publish Replicated Folder Wizard. To create the namespace, in the Namespace Path page, click Browse, and then click New Namespace.

    To create a namespace

    Click Start, point to Administrative Tools, and then click DFS Management.

    In the console tree, right-click the Namespaces node, and then click New Namespace. Follow the instructions in the New Namespace Wizard.

    To create a stand-alone namespace on a failover cluster, specify the name of a clustered file server instance on the Namespace Server page of the New Namespace Wizard.

    Important

    Do not attempt to create a domain-based namespace using the Windows Server 2008 mode unless the forest functional level is Windows Server 2003 or higher. Doing so can result in a namespace for which you cannot delete DFS folders, yielding the following error message: “The folder cannot be deleted. Cannot complete this function.”

    To share a replicated folder and publish it to a DFS namespace

    1. Click Start, point to Administrative Tools, and then click DFS Management.

    2. In the console tree, under the Replication node, click the replication group that contains the replicated folder you want to share.

    3. In the details pane, on the Replicated Folders tab, right-click the replicated folder that you want to share, and then click Share and Publish in Namespace.

    4. In the Share and Publish Replicated Folder Wizard, click Share and publish the replicated folder in a namespace, and then follow the steps in the wizard.

      Ensurepass 2017 PDF and VCE

      quot;You need to ensure that users connect to the replicated folder in their respective office when they connect to \\contoso.com\Share1.quot;

      Ensurepass 2017 PDF and VCE

      Ensurepass 2017 PDF and VCE

      Reference:

      http: //technet. microsoft. com/en-us/library/cc731531. aspx

      http: //technet. microsoft. com/en-us/library/cc772778(v=ws. 10). aspx http: //technet. microsoft. com/en-us/library/cc732414. aspx

      http: //technet. microsoft. com/en-us/library/cc772379. aspx

      http: //technet. microsoft. com/en-us/library/cc732863(v=ws. 10). aspx http: //technet. microsoft. com/en-us/library/cc725830. aspx

      http: //technet. microsoft. com/en-us/library/cc771978. aspx

      Question No: 109 – (Topic 2)

      Your network contains an Active Directory domain named adatum.com. The domain contains five servers. The servers are configured as shown in the following table.

      Ensurepass 2017 PDF and VCE

      All desktop computers in adatum.com run Windows 8 and are configured to use BitLocker Drive Encryption (BitLocker) on all local disk drives.

      You need to deploy the Network Unlock feature. The solution must minimize the number of features and server roles installed on the network.

      To which server should you deploy the feature?

      1. Server3

      2. Server1

      3. DC2

      4. Server2

      5. DC1

Answer: B Explanation:

The BitLocker-NetworkUnlock feature must be installed on a Windows Deployment Server (which does not have to be configured-the WDSServer service just needs to be running).

Question No: 110 – (Topic 2)

Your network contains an Active Directory domain named contoso.com. Network Access Protection (NAP) is deployed to the domain.

You need to create NAP event trace log files on a client computer. What should you run?

  1. logman

  2. Register-ObjectEvent

  3. tracert

  4. Register-EngineEvent

Answer: A Explanation:

You can enable NAP client tracing by using the command line. On computers running Windows VistaŚļź, you can enable tracing by using the NAP Client Configuration console. NAP client tracing files are written in Event Trace Log (ETL) format. These are binary files representing trace data that must be decoded by Microsoft support personnel. Use the -o option to specify the directory to which they are written. In the following example, files are written to %systemroot%\tracing\nap. For more information, see Logman (http: //go. microsoft.com/fwlink/?LinkId=143549).

To create NAP event trace log files on a client computer

->Open a command line as an administrator.

->Type

logman start QAgentRt -p {b0278a28-76f1-4e15-b1df-14b209a12613} 0xFFFFFFFF 9 -o

%systemroot%\tracing\nap\QAgentRt. etl -ets.

Note: To troubleshoot problems with WSHA, use the following GUID: 789e8f15-0cbf-4402- b0ed-0e22f90fdc8d.

->Reproduce the scenario that you are troubleshooting.

->Type logman stop QAgentRt -ets.

->Close the command prompt window.

References:

http: //technet. microsoft. com/en-us/library/dd348461(v=ws. 10). aspx

100% Free Download!
Download Free Demo:70-411 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 70-411 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

[Free] 2017(Sep) EnsurePass Braindumps Microsoft 70-411 Dumps with VCE and PDF 111-120
[Free] 2017(Sep) EnsurePass Braindumps Microsoft 70-411 Dumps with VCE and PDF 91-100

Name of author

Name: admin